Separate position x and y coordinates in IDE
Posted: Tue Jun 23, 2015 1:32 pm
I often want to set bodies to a common x or y coordinate.
As an example, I would like to change the x position of five bodies to 0, and retain their current y position.
This is how it is achieved currently:
1. Select one of the five bodies
2. Select the "Position" textfield property
3. Select what's left of the comma and change it to the correct value
4. Goto 1 for the remaining four bodies
Separating x and y positions would reduce the workflow to:
1. Select all five bodies
2. Enter 0 in the x position textbox and press enter
This would also be useful for vertices.
Cheers,
Niclas
As an example, I would like to change the x position of five bodies to 0, and retain their current y position.
This is how it is achieved currently:
1. Select one of the five bodies
2. Select the "Position" textfield property
3. Select what's left of the comma and change it to the correct value
4. Goto 1 for the remaining four bodies
Separating x and y positions would reduce the workflow to:
1. Select all five bodies
2. Enter 0 in the x position textbox and press enter
This would also be useful for vertices.
Cheers,
Niclas